LivePanel by Mobilane is an innovative vertical landscaping application that delivers a sustainable lliving wall system for both indoor and outdoor use.
This unique system has been developed for green façades and through over 80 years of landscaping experience. Living walls are becoming very popular, not only in the commercial environment such as offices, shops and public
spaces, but also increasingly for residential use.
The maximum profile length is 520 cm excluding the end caps. Larger walls are therefore made up of a series of profiles, placed next to each other.
There are two types of end caps (blind and flow caps), which are installed mirrored to one another on the wall.
For each 520 cm wall length a water passage is needed. Modular system based on plant cassettes of 40 x 40 cm.
Weight: Weight including plants 35kg-40kg/m2 Profiles: Both the profiles and the (optional) frame are easy for the installer to customize in the required size.
The cassettes are flexible and can be cut horizontally and vertically by using the indicated sawing lines at the back side of the cassettes.
Frame Colour: The standard frame is available in blank anodized aluminium. On request also other RAL colours are available.
• If LivePanel is applied to the inside of outer walls (façade) which are not sufficiently isolated (Rc = 4.5 m2 K/W),
an XPS insulation with a thickness of at least 20 mm has to be fitted at the inner wall.
Both these plates as well as the intermediate seams need to be completely air-tight and vapour-inhibiting.
This ensures a thermal shield of the outer wall thereby reducing the risk of fungal attack and condensation.
• An overflow / drainage should always be provided for internal applications.
• For larger walls it is advisable to install an automatic irrigation unit.
Take into account an average water consumption of 5 L/m2 of green surface per week.
This depends on local circumstances such as type of planting, ambient temperature, air-conditioning and the amount of light.
• In the calculations it is necessary to take into account tolerances in the aluminium profiles.
Your name *